As Newfoundland heads into its wet autumn and winter seasons, September is an ideal time for businesses to assess worn or discoloured floor finishes. Professional floor waxing services in St. John’s can remove deteriorated finish and apply a fresh protective coating before rain, mud, grit, and winter contaminants begin taking a heavier toll.
For businesses with appropriate vinyl and tile flooring, choosing an experienced commercial floor waxing service can help protect the underlying flooring investment while restoring a clean, professional appearance. Rather than simply cleaning the surface, professionals strip and wax floors to remove layers of old finish and establish a new protective barrier.
Although commonly referred to as “waxing,” many modern commercial floor-care systems use specialized acrylic floor finishes designed to create a durable protective layer.
Here are the steps professionals may take to properly strip, prepare, and refinish commercial floors. The exact process and products used will depend on the flooring material, existing finish, condition of the floor, and manufacturer recommendations.
Why September Is the Right Time for Floor Waxing Services
September provides an important window for commercial floor cleaning in NL before Newfoundland’s wetter autumn and winter weather arrives. Rain, mud, grit, road salt, and increased moisture tracked indoors can accelerate wear on commercial flooring and its existing finish.
A properly applied commercial floor finish creates a protective layer between seasonal contaminants and the underlying vinyl or tile. Addressing worn finishes before winter can help reduce damage while making routine floor maintenance easier throughout the messier months ahead.
Chemical & Mechanical Floor Stripping
Over time, acrylic floor finishes oxidize, trap dirt, and change color. Removing the deteriorated finish requires breaking it down without damaging the underlying flooring.
Floor Waxing Services: Preparing the Floor with Stripping Solution
A professional-grade stripping solution appropriate for the flooring and existing finish is applied according to product and manufacturer specifications. The solution is given sufficient dwell time to break down built-up layers of floor finish while remaining wet throughout the process.
Mechanical Scrubbing for Old Floor Finish
Next, a low-speed scrubbing rotary floor machine with a stripping pad can be used to remove heavy or uneven amber buildup. Depending on the condition of the existing finish, different pads or equipment may be required.
Detail Edging Before Floor Refinishing
A hand scraper is drawn along baseboards, corners, and doorjambs where mechanical machine pads cannot reach. Old wax tends to migrate and build up in these low-traffic areas.
Post-Stripping Preparation for Floor Waxing Services
Leaving stripper residue on the floor can interfere with the adhesion and appearance of the new finish, making thorough removal and rinsing an important part of the process.
Wet Vacuuming and Residue Removal
Next, the emulsified finish is removed using appropriate commercial equipment, such as a wet/dry vacuum or automatic scrubber. The floor is then thoroughly rinsed and, when required by the product or process, neutralized before the new finish is applied.
Rinse Verification
After rinsing, the floor is inspected for remaining residue or finish. Any areas that still contain old buildup or stripping residue may require additional cleaning or rinsing before proceeding.
Before applying sealers or finishes, the bare tile must be evaluated for readiness.
Moisture Testing Before Floor Waxing Services
The floor must be completely dry. Newfoundland’s damp autumn conditions can increase drying times, so professional air movement or dehumidification may be used when appropriate to support proper drying. Stripped floors should look clean, matte, and uniform. If shiny patches remain, this may indicate residual finish that could interfere with the new coating.
Those spots may need additional stripping and preparation before refinishing begins.
Applying Sealer and Commercial Floor Waxing Services
The refinishing stage creates the protective “shield” that helps defend appropriate commercial flooring against foot traffic, moisture, dirt, grit, and seasonal wear.
Base Coat Sealer
For high-traffic areas, a dedicated floor sealer may be applied when appropriate for the flooring system. The sealer helps create a uniform foundation for subsequent coats of commercial floor finish.
Applying the Topcoat with Professional Floor Waxing Services
Depending on the flooring system, product specifications, traffic levels, and desired finish, multiple coats of commercial acrylic floor finish may be applied. Each coat must be allowed to dry and cure according to manufacturer recommendations before another coat is added.
Temperature, humidity, and air circulation can all influence drying and curing. During Newfoundland’s damp late-year weather, these conditions should be monitored carefully to help the finish bond and cure properly.
The result is more than a high-gloss appearance. A properly refinished floor has a renewable protective layer that takes the brunt of everyday traffic and seasonal contaminants, helping protect the flooring underneath.
Protect Your Commercial Floors with Floor Waxing Services Before Winter
Commercial floor stripping and refinishing can benefit a wide range of high-traffic facilities, including offices, retail stores, schools, healthcare facilities, commercial buildings, warehouses, and other workplaces. Scheduling the service before the wettest months arrive can help businesses enter autumn and winter with floors that are protected and easier to maintain.
Choose Bursey Cleaners for Floor Waxing Services in St. John’s
Serving the St. John’s area, we offer over 40 years of professional experience and a reputation for excellence. Our licensed and bonded staff is ready to strip and wax the floors of your business or worksite.
Get ahead of Newfoundland’s wet autumn and winter weather with professional floor stripping and refinishing from Bursey Cleaners. Our team can assess your commercial floors and determine an appropriate cleaning and refinishing approach based on the flooring type, condition, and traffic levels. Contact us today to learn more or book an appointment online.